Scroll

Toll Free: 800.643.7822

J-STD-001 Aerospace Specialist Recertification – Online Program

This 1-day live online course, for anyone needing to renew their existing certification, covers the J-STD-001 “Space Electronics Hardware Addendum” and provides additional requirements over those published in IPC’s J-STD-001, “Requirements for Soldered Electrical & Electronic Assemblies” to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal cyclic environments experienced while traveling and operating in space.

This lecture only program will identify and review each section of the addendum, followed by an online exam. There are no workmanship requirements for this module.

Recertification is required every 24 months.

Important Prerequisites:

Specialists must have a current J-STD-001 CIS Certification and both this certification and the J-STD-001 Space Addendum certification must be of the same revision. In addition, your J-STD-001 Specialist Certification must include module one and at least one more module in the program to be able to qualify to take this program. This optional Module to the J-STD-001 Specialist Training Program is not published as part of the regular J-STD-001 course materials.

The following Standard is required for class participation:

Request Information Download Datasheet Request Onsite Training
Date: July 10, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: July 31, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: August 07, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: September 04, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: September 25, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: October 23, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: November 06, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: November 20, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: December 04, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 8 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE


Welcome to eTraining from EPTAC

Now, in addition to our classroom and onsite training programs, you can enjoy the convenience of online training with live interaction and instruction from EPTAC’s Master Instructors. Add convenience and cut expenses by registering online today.

Standard(s) and Document(s) Required

FOR eTRAINING PARTICIPANTS ONLY:

  • Once registered, you are required to order the relative standard(s) (if needed) for class if you do not already have them. They can be found by clicking on the order buttons above. Any additional document(s) will be sent to the registrant’s email from EPTAC Corporation in PDF format. These materials will be needed to participate in class.

Exam Proctoring Requirements (Now with Remote Proctoring)

FOR eTRAINING PARTICIPANTS ONLY:

  • Now with stay-at-home/office remote proctoring for certification testing.
  • EPTAC’s got you covered. Exams required for IPC Certification and Recertification can be proctored remotely via IPC EDGE or with an EPTAC Certified Master IPC Instructor. Ask us how we can help find an option for you either remotely in a stay-at-home/office environment or with one of our Instructors.
  • Note: Once enrolled, download of Remote Proctoring Software is required.
  • Contact EPTAC ([email protected]) or 1.800.643.7822 to coordinate your exam delivery.

System Requirements

FOR eTRAINING PARTICIPANTS ONLY:

  • IMPORTANT: Camera (webcam) and microphone required for all live EPTAC Online programs.
  • Note: Once enrolled, download of Remote Proctoring Software is required. You will receive a link to do so.
  • FOR IT DEPARTMENTS (Information ONLY, NO need to download): LockDown Browser Software
  • Online Programs can be launched from your browser. See TEST YOUR COMPUTER below.
  • ZOOM Account (Optional). You can download the ZOOM APP FREE (This is free. Sign up for a basic plan using the same registration email for this class. Sign Up Here)
  • Already have a ZOOM Account? Perfect. Register for this course with the same login email address you use with ZOOM.
  • TEST YOUR COMPUTER: Just to make sure you are ready to go, to test your computer or mobile device so that you are ready to go, click here for more information.

If you are experiencing any problems, please contact Customer Support at [email protected].


Everyone who successfully completes the program will receive:

  • IPC Certificate of Training


Day 1

  • Introduction
  • Course Objectives
  • Differences in Requirements Between Standard and Space Addendum
  • Questions and Answers
  • Testing


This Program is delivered in English only.

Important Requirements:

Specialists must have a current J-STD-001 CIS Certification and both this certification and the J-STD-001 Space Addendum certification must be of the same revision. In addition, your J-STD-001 Specialist Certification must include module one and at least one more module in the program to be able to qualify to take this program.