Scroll

Toll Free: 800.643.7822

J-STD-001 Standard Expert Recertification – Online Program

This 4-day live online course, is for anyone needing to renew their existing J-STD-001 Standard Expert Certification. Attendees will review the J-STD-001 standard and must successfully complete and pass all exams in order to renew their 001 Standard Expert certification.

Recertification is required every 24 months.

The following Standard is required for class participation:

Date: July 06, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 32 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: August 03, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 32 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: August 31, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 32 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: September 08, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 32 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: November 02, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 32 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE
Date: November 16, 2020
Time: 10:00am ET (Eastern Time)
Course Length: 32 Hours
Cost: Call 1.800.643.7822 or email [email protected] for Pricing
INQUIRE


Welcome to eTraining from EPTAC

Now, in addition to our classroom and onsite training programs, you can enjoy the convenience of online training with live interaction and instruction from EPTAC’s Master Instructors. Add convenience and cut expenses by registering online today.

Standard(s) and Document(s) Required

FOR eTRAINING PARTICIPANTS ONLY:

  • Once registered, you are required to order the relative standard(s) (if needed) for class if you do not already have them. They can be found by clicking on the order buttons above. Any additional document(s) will be sent to the registrant’s email from EPTAC Corporation in PDF format. These materials will be needed to participate in class.

Exam Proctoring Requirements (Now with Remote Proctoring)

FOR eTRAINING PARTICIPANTS ONLY:

  • Now with stay-at-home/office remote proctoring for certification testing.
  • EPTAC’s got you covered. Exams required for IPC Certification and Recertification can be proctored remotely via IPC EDGE or with an EPTAC Certified Master IPC Instructor. Ask us how we can help find an option for you either remotely in a stay-at-home/office environment or with one of our Instructors.
  • Note: Once enrolled, download of Remote Proctoring Software is required.
  • Contact EPTAC ([email protected]) or 1.800.643.7822 to coordinate your exam delivery.

System Requirements

FOR eTRAINING PARTICIPANTS ONLY:

  • IMPORTANT: Camera (webcam) and microphone required for all live EPTAC Online programs.
  • Note: Once enrolled, download of Remote Proctoring Software is required. You will receive a link to do so.
  • FOR IT DEPARTMENTS (Information ONLY, NO need to download): LockDown Browser Software
  • Online Programs can be launched from your browser. See TEST YOUR COMPUTER below.
  • ZOOM Account (Optional). You can download the ZOOM APP FREE (This is free. Sign up for a basic plan using the same registration email for this class. Sign Up Here)
  • Already have a ZOOM Account? Perfect. Register for this course with the same login email address you use with ZOOM.
  • TEST YOUR COMPUTER: Just to make sure you are ready to go, to test your computer or mobile device so that you are ready to go, click here for more information.

If you are experiencing any problems, please contact Customer Support at [email protected].


Everyone who successfully completes the program will receive:

  • IPC Certificate of Training


DAY 1

  • Introduction and Course Overview
  • Safety in Electronic Assembly
  • General Requirements of J-STD-001
  • Materials, Components and Equipment Requirements
  • General Soldering and Assembly Requirements
  • PCB Requirements
  • Cleaning Process Requirements
  • Progress Check and Review

DAY 2

  • Wire and Terminal Assembly and Soldering
  • Through-Hole Mounting and Terminations
  • Progress Check and Review

DAY 3

  • Surface Mount Technology Requirements
  • Progress Check and Review

DAY 4

  • Coating and Encapsulation
  • Rework and Repair
  • Product Assurance
  • Progress Check and Review


This Program is delivered in English only.